|
Rides, Gatherings, Events, Rally's & Friendly BS This is where we share our passion for our Victory's. Help others with their machines and organize to ride, ride..........ride. |
|
Thread Tools | Display Modes |
#1
|
|||
|
|||
Shifter-Same on Vision and Cross?
The shifter on my Vision has always been sloppy; and it's bad enough that it affects downshifts.
My understanding is they changed the design in 2011 due to the wear. (2008 to 2010 have a square post, inside a round bushing. 2011 are round/round. Witch Doctors makes bushings - but only for 2011/newer. (which I have a set) My question - are the Cross and Vision shifter's (and the carriers -where they bolt to the boards - recall they are adjustable) the same? I think they are. If yes, anybody got one laying around? Thanks for the help, John
__________________
"Get Busy Livin', or Get Busy Dying'" Johnny Ritz & #434 VMC #59 John Ritter, the one still living. |
#2
|
|||
|
|||
Victory parts finch is a little screwie. It say 2008 to 2016 vision and CC are all the same. I know my 08 has a hex hole. Witchdoctor goes off Vic;s parts finch.
Yes in 2011 they switch to a round hole. The round hole shifter should work on yours but you have to change the screw that goes threw the shifter. Thats been the same from 2011 on. P/N 7519176. Then you can use withchdoctors bushings https://www.youtube.com/watch?v=E4MvDYhaYl4
__________________
08 vision with car tire |
#3
|
|||
|
|||
Quote:
Here are the parts needed to convert from what I understood from the fiche. (That's if you have the witchdoctors bushings - which I do. If you don't you will also need the bushing from Polaris - which I understand are poor quality)
__________________
"Get Busy Livin', or Get Busy Dying'" Johnny Ritz & #434 VMC #59 John Ritter, the one still living. |
#4
|
|||
|
|||
Great Update!
Installed tonight and took for a quick ride.
Exactly from the start I noticed the HUGE difference. Shifts like a dream now! I should've done this 60K ago. Oh my what a difference! Very Highly recommend this update. (I did have to emery cloth the new bolt just a bit to fit the Witch Doctors bushings - then added a bit grease to keep things lubed)
__________________
"Get Busy Livin', or Get Busy Dying'" Johnny Ritz & #434 VMC #59 John Ritter, the one still living. |
Thread Tools | |
Display Modes | |
|
|