PDA

View Full Version : POWER COMMANDER FOR SALE

mnhammer
08-30-2006, 11:35 AM
POWER COMMANDER FOR A O5 HAMMER ASKING 250.00 . ALL SO HAVE STAGE 1 PIPES AND FILTER ASKING 300.00 OR BEST OFFER.
sid2002
08-30-2006, 01:32 PM
Steve what are you doing to your Hammer?
mnhammer
09-01-2006, 10:01 AM
Not much just cleaning out. To much stuff not enought space.
Brianu1
10-20-2006, 03:31 PM
I have the stage one kit installed. What else does the power commander do for bike? I am not familiar enough with it. Also, what brand is it? Is it the one by Ness? How hard is it to install, and does it replace any of the stock components?

Brian Urlaub
Tazz
10-21-2006, 10:38 AM
Are the pipes drag pipes or performance pipes?
sid2002
10-23-2006, 07:13 AM
I have a set of Drag pipes if you are interested. Send me a PM.
mnhammer
10-24-2006, 11:21 AM
The pipes are the victory stage 1 slip ons. The power commander is made by power commander. It takes the place of you stock commputer you can fine tune it with the help of a dyno.
VicRep
10-24-2006, 04:29 PM
Maximizing performance takes a perfect balance of fuel delivery AND engine timing. Power Commander-type units only adjust fuel delivery...they do not affect engine timing...so all you are really doing is throwing more fuel on top of the factory settings....making the bike run too rich most of the time.

These units, especially matched with a Stage 1 program (a richer fuel delivery setting than stock), run you the risk of not having ENOUGH adjustment to lean the bike out as far as you NEED for maximum power. If you read the new Lloyd's instructions, they call for a STOCK program....because with a Stage 1 program, the bike will run too rich throughout the entire RPM range. (I have personally experienced this.)

Unless you spend money on a couple hours of dyno-tuning at 100-200 RPM increments with a reputable high performance tuner, you have a very high chance of hurting your bike's performance, versus enhancing it.